24 Products Found

FJ-MX-095-NF Medium-Expansion Foam Nozzle Same as above, but used with 95 gpm eductors   FJ-MX-MD FOAMJET-MX Air-aspirating multi-expansion foam-making attachment for use with all Max-Series and ZN Series Industrial Nozzles. Provides varying foam expansion based upon stream selection. The FOAMJET-MX is constructed of durable UV Stabilized Polyethylene and aluminum   FJP-FT FOAMJET THUNDERFOG - RUBBER   FJ-LX-FQ FOAMJET-LX QUADRAFOG 1.5" (38mm) Air-aspirating foam-making attachment for all 1.5" (38mm) QuadraFog Series nozzles. The FOAMJET-LX is constructed of durable UV stabilized polyethylene, stainless steel, and aluminum.   FJ-MX-125-NF Medium-Expansion Foam Nozzle Same as above, but used with 125 gpm eductors.   FJ-H FOAMJET - HANDLINE - RUBBER Air-aspirating foam-making attachment for all Handline, Dual-Force and Metro 2 series nozzles. The FOAMJET is constructed of molded rubber, stainless steel, and lightweight nickel plated aluminum.   FJ-LX-U LX-FOAMJET - ULTIMATIC Air-aspirating low expansion foam-making attachment for all Ultimatic and Metro 0 Series Nozzles. Provides excellent low expansion foam with a tight bubble structure. The FOAMJET-LX is constructed of durable UV stabilized polyethylene, stainless steel, and aluminum.   FJ-MX-060-NF Medium-Expansion Foam Nozzle Air aspirating medium expansion foam nozzle for use with 60 gpm eductors using medium expansion foam concentrates. Hard coat anodized aluminum, stainless steel mesh, and black UV stabilized polyethylene construction. 1.5" NH (38mm) swivel rocker lug coupling is standard.   FJ-MX-FT MX-FOAMJET - THUNDERFOG Air-aspirating foam-making attachment for all 1.5" & 2.5" (38mm & 64mm) ThunderFog nozzles. Flow range of 30-250 gpm (110-1100 l/min) matches that of corresponding 1.5" & 2.5" (38mm & 64mm) ThunderFog nozzle (needed for operation). The MX-FOAMJET is constructed of durable UV stabilized polyethylene and aluminum. Diameter 8.6" (21.8cm). NOTE: Will not fit fixed teeth models manufactured prior to 5/97 without bumper upgrade. (Free upgrade with purchase of FJ-MX-FT).   FJ-MX-DQ MX-FOAMJET - QUADRAFOG 1" (25mm) Air-aspirating foam-making attachment for all 1.0" (25mm) QuadraFog Series nozzles. Aspirates foam when operating the 1.0" (25mm) QuadraFog nozzle in 24-40 gpm (90-150 l/min) setting. The MX-FOAMJET is constructed of durable UV stabilized polyethylene and aluminum. Diameter 7.4" (18.8 cm). NOTE: Not intended to produce foam at 5 and 10 gpm (20 and 40 l/min) settings.   FJ-MX-FQ MX-FOAMJET - QUADRAFOG 1.5" (38mm) Air-aspirating foam-making attachment for all 1.5" (38mm) QuadraFog nozzles. Flow range of 30-125 gpm (110-500 l/min) matches that of corresponding 1.5" (38mm) QuadraFog nozzle (needed for operation). The MX-FOAMJET is constructed of durable UV stabilized polyethylene, stainless steel, and aluminum. Diameter 7.4" (18.8cm).   FJ-LX-M FOAMJET-LX - MASTER Air-aspirating low expansion foam-making attachment for use with all Master Stream 1000, 1250S, and the Master Foam 250-750 gpm (946-2839 l/min) series nozzles. Provides low expansion foam and excellent stream reach. The FOAMJET-LX is constructed of durable UV Stabilized Polyethylene, stainless steel, and aluminum.   Z627 2" MASTER FOAM DUST CAP   FJ-MX-F MX-FOAMJET - TWISTER 1.5" (38mm) Air-aspirating foam-making attachment for all 1.5" (38mm) Twister Series nozzles. Flow range of 20, 60, & 95 gpm (75, 230, & 360 l/min) matches that of corresponding 1.5" (38mm) Twister Series nozzle (needed for operation). The MX-FOAMJET is constructed of durable UV stabilized polyethylene and aluminum. Diameter 7.4" (18.8 cm).   FJ-U FOAMJET - ULTIMATIC - RUBBER Air-aspirating foam-making attachment for all Ultimatic and Metro 0 Series nozzles. The FOAMJET is constructed of molded rubber, stainless steel, and lightweight nickel plated aluminum.   FJ-HM FOAMJET - MIDRANGE - RUBBER Air-aspirating foam-making attachment for all Mid-Matic, Mid-Force & Metro 1 series nozzles. The FOAMJET is constructed of molded rubber, stainless steel, and lightweight nickel plated aluminum.   FJ-MX-D MX-FOAMJET - TWISTER 1" (25mm) Air-aspirating foam-making attachment for all 1.0" (25mm) Twister Series nozzles. Flow range of 10, 24, & 40 gpm (37, 90 & 150 l/min) matches that of corresponding 1.0" (25mm) Twister Series nozzle (needed for operation). The MX-FOAMJET is constructed of durable UV stabilized polyethylene and aluminum. Diameter 5.2" (13cm).   FJ-UMX MX-FOAMJET - ULTIMATIC Air-aspirating foam-making attachment for all Ultimatic and METRO 0 Series nozzles. Flow range of 10-125 gpm (40-500 l/min) matches that of corresponding TFT Ultimatic and METRO 0 (needed for operation). The MX-FOAMJET is constructed of durable UV stabilized polyethylene and aluminum. Diameter 7.4" (18.8cm).   FJ-MX-HM MX-FOAMJET - MIDRANGE Air-aspirating foam-making attachment for all Mid-Force, Mid-Matic and METRO 1 Series nozzles. Flow range of 70-200 gpm (260-760 l/min) matches that of corresponding Mid-Force, Mid-Matic and METRO 1 Series nozzles (needed for operation). The MX-FOAMJET is constructed of durable UV stabilized polyethylene, and aluminum. Diameter 7.4" (18.8cm).   FJ-HMX MX-FOAMJET Multi-expansion foam-making attachment for all Handline, Dual-Force and METRO 2 Series nozzles. Flow range matches that of corresponding TFT Handline, Dual-Force and METRO 2 series nozzles (needed for operation). The MX-FOAMJET is constructed of durable UV stabilized polypropylene and lightweight hard coat anodized aluminum. Diameter 8.6" (21.8 cm).   FJ-LX-HM FOAMJET-LX MIDRANGE Air-aspirating low expansion foam-making attachment for all Mid-Matic, Mid-Force and Metro 1 Series Nozzles. Provides excellent low expansion foam with a tight bubble structure. The FOAMJET-LX is constructed of durable UV stabilized polyethylene, stainless steel, and aluminum.   FJ-LX-M2 FOAMJET-LX - MASTER   FJ-LX-M3 FOAMJET-LX - MASTER 1500   FJ-DQ FOAMJET - QUADRAFOG 1" (25mm) RUBBER Air-aspirating foam-making attachment for all 1" (25mm) QuadraFog Series nozzles. The FOAMJET is constructed of molded rubber, stainless steel, and lightweight nickel plated aluminum. NOTE: Not intended to produce foam at 5 and 10 gpm (20 and 40 l/min) settings.